Minolta Di251 Service Manual page 25

Power Switch ON
Full speed
Power Unit Cooling Fan Motor M4
Cooling Fan Motor M3
170
Ozone Fan Motor M8
Predrive
Main Motor M2
Fusing Roller Heater Lamp H1
Manual Feed Paper Take-Up Clutch CL2
Warm-up completed
1st Drawer Paper Take-Up Solenoid SL1
Polygon Motor M5
Synchronizing Roller Sensor PC2
Synchronizing Clutch CL1
Paper Exit Sensor PC3
Agitation predrive
I/C Motor M1
Laser
Drum Charge Bias
Image Transfer Bias
Developing Bias
Start key ON
Half speed
Full speed
Half speed
Fusing predrive
*1
*1: When the Main Motor or I/C Motor remains energized for a continuous 300-ms period.
*2: When the Main Motor and I/C Motor remain deenergized for a continuous 10-s period.
Full speed
Half speed
Full speed
*2
Half speed