(2)
User Management
• Permits setting of the various User Management functions.
1. User Management Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the "User Management" key.
3. Select the appropriate function.
4. After the settings are complete, touch the "Enter" key to validate the settings.
<Exiting the Mode>
• Touch the "Enter" key.
2. Settings in the User Management
Touch Panel
Display
Cofirmation Beep
Select the volume of the "beep" that sounds when a key on the control
panel is pressed or one on the Touch Panel is touched.
Alam Volume
Select the volume of the alarm.
Panel Clearing
Used to disable keys on the Touch Panel, allowing the user to clean
the Touch Panel without having to turning OFF the Power Switch.
Dehumidity
Starts a dehumidifying sequence for the PC Drum and Scanner.
Toner Replenisher Replenishes the supply of toner.
Data Send
Transmits various data to the Center when a Data Terminal is
mounted.
Setting (The default is
0
1
0
1
S-13
Highlighted
2
3
2
3
).
4
5
4
5