Minolta Di251 Service Manual page 203

Cable on Hook End
pulley H
pulley G
pulley E
10. Wind the hook end of the cable two turns coun-
1167D054AD
11. Wind the bead end of the cable four turns clock-
Cable on
Bead End
NOTE
• Make sure that no part of the cable rides on the
other.
1167D055AD
12. Slide the pulley toward the rear and fit one retain-
13. Pushing the pulley tightly up against the retaining
4011D051AA
14. Wind the fixed bead end of the cable around pul-
4011D052AC
15. Wind the hook end of the cable around pulley E
pulley F
4011D103AA
terclockwise from the front to the rear.
wise from the rear to the front. Then, secure the
cable with tape.
ing ring E type.
ring E type, secure the pulley with one screw.
ley H and pulley G and fit the fixed bead at a posi-
tion about 5.5 mm from the Scanner rail.
and pulley F.