Minolta Di251 Service Manual page 202

pulley D
pulley C
pulley A
pulley B
Cable Guide
4. Slide the pulley to the front and fit one retaining
ring E type.
5. Pushing the pulley tightly up against the retaining
ring E type, secure the pulley with one screw.
4011D048AA
6. Wind the fixed bead end of the cable around pul-
ley D and pulley C and fit the fixed bead at a posi-
tion about 5.5 mm from the Scanner rail.
4011D049AC
7. Wind the hook end of the cable around pulley A
and pulley B.
4011D102AA
8. Install the cable guide, fit the hook end of the
cable into the groove in the cable guide, and hook
the spring.
4011D050AA
Rear
9. Position the round bead of the cable (black) at the
position shown in the illustration.
1167D051AC
D-21