Minolta Di251 Service Manual page 271

Touch Panel
Display
Initial
Transmission
Counter Clear
Call Completion
RAM Clear
Common DT
Dial Mode
Auto Receive
Result Code
(9) ROM Version
• Shows the ROM versions.
(10) Level History
• Displays the various level histories.
Touch Panel
Display
ATDC Set
ATDC Current
Vg Current
Vb Current
Setting (The default is
Performs the initial transmission from the PPC to the Center to check
for correct communication after the Data Terminal has been set up.
Clears the spare counter.
<Procedure>
1. Touch the Counter Clear key.
2. Select the number assigned to the counter to be cleared.
Transmits the signal of notifying the completion of service job to the
Center.
Initializes the Data Terminal settings.
YES
Displays the screens for communications settings.
Sets the type of telephone line of the user.
Tone
Sets the auto reception function.
YES
Set the value according to the type of the modem on the copier.
Displays the voltage set with ATDC Sensor Automatic Adjustment.
Displays the ATDC Sensor T/C setting in percentage.
Displays the current value of the grid voltage.
Displays the current value of the developing bias voltage.
Highlighted
NO
Pulse
NO
Setting
).