Minolta Di251 Service Manual page 261

4-4. Setting in the Tech. Rep. Mode
(1) Tech. Rep. Mode
• This function allows the Tech. Rep. to make various settings and adjustments.
1. System Set
• Set the environment for copying operations.
Touch Panel
Display
Auto Paper
Configuration
FLS Paper
Simplex/Duplex
Dry Key Set
Function Limit
Setting (The default is
Select the paper size selection scheme for automatic original size
detection.
Inch/Metric
Metric
Set the size for FLS.
F: 330 mm
C: 203 mm
Select whether or not to enable the setting of 1-Sided
under Original. Copy Default available from User's Choice.
Simplex&Duplex Permits selection of all copying modes.
Duplex Only
Select whether to display the Dry key for "User Management" of Util-
ity.
Notes:
• Scanner, Scanner & Drum: "Dehumidify" key is displayed.
• Disable: "Dehumidify" key is not displayed.
Scanner
Select whether to limit the functions to be set on the control panel or
not.
Enables the functions to set the number of copies to
ON be made, paper source, zoom ratio, and image den-
sity.
Enables all functions (no Limit)
OFF
Highlighted
The measurement is rounded to the nearest
standard inch or metric size.
The measurement is rounded to the nearest
standard metric size.
F: 330 mm
F: 330 mm
C: 216 mm
C: 210 mm
Permits selection of 2-sided copying modes
only.
Scanner&Drum
).
F: 330 mm
C: 220 mm
1-Sided
Disable