Checking And Adjusting The Skewed Feeding - Minolta Di251 Service Manual

1.8.3

Checking and adjusting the skewed feeding

Rev. 11..0.0/03.01
8. Remove the Connector Cover of the copier
and plug in the Hookup Cord of the Duplexing
Document Feeder.
1. Turn on the power to the main unit.
2. Set the copier into the following modes:
Auto Paper Select
One-sided Original - One-sided Copy
3. Place a sheet of A4 or Letter paper crosswise
onto the Document Feed Tray.
4. Press the start key and open the paper guide
F1 as soon as the paper is fed into the unit
and the scanning starts.
5. After the paper is fed onto the Original Glass,
open the Duplexing Document Feeder gently.
If the Duplexing Document Feeder is opened
quickly, the paper may slide out of position.
I-37
NOTE
Di251/Di351