Minolta Di251 Service Manual page 265

Touch Panel
Display
Machine
Configuration
Technical Memo
Original Size
Detecting
Option
(3) Administrator # Input
• Set an ID number for opening the "Admin. Management Mode" screen of Utility Mode
from the 10-Key Pad.
(4) Counter
• Shows the number of copies made on each paper size or type.
<Clearing a Count>
1. Open the counter menu screen.
2. Select the counter to be cleared.
3. Press the Clear key.
4. Touch "END".
Press the Interrupt key to undo the clearing operation, restoring the original count.
"I/C Life 1" and "I/C Life 2" of "PM" cannot be cleared. They are automatically reset when
a new I/C is installed.
<Clearing All Counts of a Counter Type at Once>
1. Touch the "Counter Reset" key.
2. Select the counters to be cleared all at once.
3. Touch "OK".
Touch Panel
Display
Paper
Setting (The default is
Displays the machine configuration status.
Enter the serial number and other data.
Select "ON" when the optional Original Size Detecting Sensor is
mounted.
ON
Counts the number of sheets of paper used according to the size and
type.
Paper size
A3
B4
A4
B5
A5
FLS 5-1/2 x 8-1/2
Highlighted
Setting
11 x 17
11 x 14
Letter
Legal
Exec.
).
OFF
Paper Type
Normal
Recycle
Special
Not for 2-sided