(3)
Cleaning of the Paper Dust Remover Assy
(4)
Removal of the Synchronizing Roller Gear and Synchronizing Roller Bushing
Ground Plate
1. Remove the Paper Dust Remover Assy.
2. Using a brush, whisk dust and dirt off the Paper
Dust Remover Assy.
4011D011AA
1. Open the Side Cover.
4011D009AA
2. Snap off two retaining rings E type and the upper
and lower Synchronizing Roller gears.
4011D012AA
3. Remove one screw and the ground plate.
4011D013AA
Bushings
NOTE
• When reinstalling the ground plate, make sure that
the ground plate is in contact with the side faces of
the bushings.
4011D014AB
D-11