Drawer Paper Take-Up Control; Paper Take-Up Roll; Paper Take-Up Retry Control; Paper Take-Up Interval Control - Minolta Di251 Service Manual

14-7.

Drawer Paper Take-Up Control

(1)

Paper Take-Up Roll

• Drive from the Main Motor is transmitted via a gear train to the Paper Take-Up Clutch
(spring clutch). The Paper Take-Up Roll is turned when the 1st Drawer Paper Take-Up
Solenoid is then energized.
1st Drawer Paper Take-Up Solenoid SL1
Electrical Component
SL1
(2)

Paper Take-Up Retry Control

• To minimize the occurrence of a paper misfeed, the paper take-up sequence is tempo-
rarily halted and a paper take-up retry sequence is initiated if the sheet of paper does not
reach the Synchronizing Roller Sensor within a given period of time after the paper take-
up sequence has been started. This sequence is repeated a given number of times.
Paper Take-Up Retry
(3)

Paper Take-Up Interval Control

• To minimize the occurrence of a paper misfeed due to improper paper separation, the
interval between two paper take-up sequences is automatically varied according to the
type and size of paper being used.
Paper Take-Up Clutch
Control Signal Energized Deenergized
PJ3A-13B
Given No. of Paper Take-Up
Retry Sequences
M-34
Main Motor M2
Paper Take-Up Roll
L H
2
4011M022AA
Wiring Diagram
5-H