(9)
Winding of the Scanner Drive Cables
Pulley F
Pulley E
Cable on Hook End
Pulley C
Pulley G
Front
1. Position the round bead of the cable (silver) at the
location shown in the illustration.
1167D051AC
2. Wind the hook end of the Scanner Drive Cable
two turns counterclockwise from the rear side to
the front.
1167D052AD
3. Wind the bead end of the cable four turns clock-
wise from the front to the rear. Then, secure the
Cable on
cable with tape.
Bead End
NOTE
• Make sure that no part of the cable rides on the
other.
1167D053AD
Pulley H
Pulley B
Pulley A
Pulley D
4011D047AB