Introduction; Checking The Electrical Components - Minolta CF2002 Service Manual

NOTE
• For the malfunction codes and paper misfeeds, see TROUBLESHOOTING of Service
Manual for CF3102/2002 copier.
1.

INTRODUCTION

1-1.

Checking the electrical components

<Procedure>
1. Check cables for proper connection (to see if any is disconnected or left loose).
2. Using the External Panel Controller, run Test Print of the Tech. Rep. mode.
3. If an image quality problem occurs, the fault is on the printer (engine) side.
4. If there is no image quality problems occurring, the fault is on the controller side.
T-1