Saving Bios Settings; Saving Irmc Settings; Connecting Virtual Media To The Managed Server Blade - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

5.1.3

Saving BIOS settings

The description for saving the BIOS settings can be found in chapter „Save &
Exit menu" in the "D3142 BIOS Setup Utility for PRIMERGY BX920 S4"
reference manual.
For the Japanese market, follow the instructions provided separately.
5.1.4

Saving iRMC settings

Ê Open the iRMC web interface "FUJITSU ServerView® iRMC S4 Web
Server" directly.
V
CAUTION!
Saving functionality of iRMC configuration is only supported with iRMC
web interface directly. Saving functionality of iRMC configuration via
MMB web interface is not supported.
Ê Open the iRMC S4 – Network Settings – Ethernet, and confirm IP Address, Subnet
Mask and Gateway.
Ê Open the iRMC S4 - Save Configuration.
Ê Click the Save All button in section of "Save iRMC S4 Firmware settings in
ServerView WinSCU XML format".
®
Ê Store the backup file in the system of the FST.
5.1.5 Connecting virtual media to the managed server
blade
The management blade web interface uses the iRMC Virtual Media function to
provide the server blade a "virtual" drive which is located elsewhere in the
network. This function can be used to boot a server blade from a remote DVD
drive or ISO file.
To start the Virtual Media function for the server blade proceed as follows.
Ê Enter the management blade web interface.
Ê Open the Components – System – Server Blades – Server Blade-x menu for the
desired server blade.
BX920 S4
Upgrade and Maintenance Manual
Basic software procedures
65