Settings In Bios Setup; Calling Bios Setup - Fujitsu PRIMERGY 300 Operating Manual

Settings in BIOS Setup

In BIOS Setup you can set the system functions and the hardware configuration of
the server. When the server is delivered, the default entries are valid (see
Technical Manual for the system board). You can customize these settings to your
requirements in BIOS Setup.
If the Power menu is available in the BIOS setup, you must ensure that
i
the power saving functions are disabled in server operation.
If you want to change settings in BIOS Setup, you must:
•
call BIOS Setup
•
select the relevant menu
•
select the field for the entry you want to change
•
change the entry
•
make other settings, if required
•
save the settings and exit BIOS Setup
This chapter shows you how to call and operate BIOS Setup. The menus and
setting options provided by BIOS-Setup are described in detail in the Technical
Manual for the system board.

Calling BIOS Setup

Reboot the server.
Ê
One of the following messages will be displayed at the bottom of the screen:
Press <F2> to enter Setup
Press <F1> to resume, <F2> to Setup
Press the function key [F2]
Ê
If you have assigned a setup password, you must now enter this
i
password and confirm it with the Enter key.
The Main menu of BIOS Setup is displayed on the screen.
A26361-K423-Z202-3-7619
[F2].
[F2] [F2]
29