Beeper Frequency - Intermec 700 Series User Manual

Appendix A — Configurable Settings

Beeper Frequency

Sets the frequency for the good read beep. Note that this is not available
when you use an imager with your 700 Series Computer.
Action
Tap the Beeper frequency parameter, then enter a frequency value to
change this parameter setting.
SNMP OID
1.3.6.1.4.1.1963.15.3.1.4.1.7.1
Options
1000–4095 (default is 2090)
700 Series Color Mobile Computer User's Manual 367