Intermec 700 Series User Manual page 133

700 Series Color Mobile Computer User's Manual
General
Below are descriptions and meanings for each piece of information pro-
vided via the General tab. Note that the information is listed alphabetically.
S Adapter MAC:
This identifies the MAC address for this 802.11b adapter.
S Antenna:
This identifies the antenna being used with the assigned profile: "Prima-
ry," "Secondary," or "Diversity."
S AP Mac:
This identifies the MAC address of the access point to which this 700
Series Computer is connected.
S Encryption:
This indicates whether WEP encryption is "Enabled" or "Disabled
(Open)." See page 402 for more information about WEP encryption.
S ESS:
This identifies the type of network to which you are attached, either an
ESS (Embedded Security Subsystem) 802.11 Station, or Ad-hoc.
S IP:
This provides the IP address which can be set as either DHCP (Dynam-
ic Host Configuration Protocol) or statically.
S Link:
This indicates the speed at which a connection is made.
S Power:
This indicates the power status of this 700 Series Computer: "Always
On" is the default.
S Scanning:
Status of association. When connected to a network, this changes to
"Connected to NET" with NET being the name of the network to
which you are connected.
S Signal:
This identifies the radio signal strength (in dBm).
Chapter 4 — Network Support
111