Beeper
Enable the Beeper
700 Series Color Mobile Computer User's Manual
Note: Each time the 700 Computer is cold-booted, all default settings are
restored.
If the beeper is disabled on your 700 Color Computer, do the following
instructions to enable the beeper. If you are not able to enable the beeper,
then contact Customer Support.
For information about setting volume levels for screen taps, ActiveSync
alert noises, etc., tap Start → Help → Pocket PC Basics
Notifications.
Do the following to enable the beeper:
1 Tap Start → Settings → the Personal tab → the Sounds & Notifica-
tions icon → the Volume tab.
2 Drag the System volume slider bar to the right off the "Silent" position.
3 Tap ok to exit this applet.
Chapter 1
—
Introduction
, then select
7