Intermec 700 Series User Manual page 383

Appendix A — Configurable Settings
Code 11 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Code 11 bar code data. Note that this is not
available when you use an imager with your 700 Series Computer.
Action: Tap (+) to expand the Symbology ID parameter, select the Code 11 user
ID parameter, then enter a user ID value to change this parameter setting.
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.16.1
Options: x where x is a single ASCII character. Default is asterisk (*).
700 Series Color Mobile Computer User's Manual 361