Identification; Contact - Intermec 700 Series User Manual

Identification

700 Series Color Mobile Computer User's Manual
To access the settings from the 700 Series Computer, tap Start → Settings
→ the System tab → the SNMP icon → the Identification tab to access
its parameters.
The following are parameters for contact, location, and name information
for support purposes. Note that these are listed in the order of their appear-
ance within the Identification tab.

Contact

Sets the contact information for the person responsible for this 700 Series
Computer.
Action
Tap the Contact parameter, then enter the name of your contact represen-
tative to change this parameter setting.
SNMP OID
1.3.6.1.2.1.1.4.0
Options
The identification contact may be up to 255 ASCII characters. Default is
no characters or blank.
Appendix A — Configurable Settings
385