Beeper; Enable The Beeper - Intermec 700 Series Color User Manual

Beeper

Enable the Beeper

700 Series Color Mobile Computer User's Manual
Note: Each time the 700 Color Computer is cold-booted, all default set-
tings are restored unless registry storage is enabled.
For information about setting volume levels for screen taps, ActiveSync
alert noises, etc., tap Start > Help > Pocket PC Basics
Notifications.
To enable the beeper:
1 Tap Start > Settings > the Personal tab > Sounds & Notifications > the
Volume tab.
2 Drag the System volume slider bar to the right of the "Silent" position.
3 Tap ok to exit this applet.
Chapter 1 — Introduction
, then select
7