Intermec 700 Series User Manual page 137

700 Series Color Mobile Computer User's Manual
WAN Radio CORE Module — Details
Below are descriptions and meanings for each piece of information pro-
vided via the Details tab, reading from top to bottom. Most of this is simi-
lar to what is shown under the General tab. Note that the information is
listed alphabetically.
S Band:
This identifies the frequency bands used by this radio module.
S Firmware Rev:
This identifies the firmware version, if available.
S Manufacturer:
This lists the name of the manufacturer that developed this radio mod-
ule, such as "Sierra Wireless."
S Model:
This lists the product name for this radio module, such as "Model 72."
S Operator:
This identifies the service providing the network support, if known.
S Phone Number:
This identifies the telephone assigned via the Phone application, see
page 120 for more information.
S Radio Temp:
This identifies the temperature of the radio module, or lists "Unavail-
able degrees" if no information or temperature cannot be measured.
S RSSI:
This displays the RSSI frequency or lists "Unavailable" if there is no sig-
nal or the signal cannot be retrieved from the radio module.
S Serial Status:
This indicates whether serial communications passed ("PASS") or failed
("FAIL") in its last transaction. A status of "FAIL" typically indicates
that the 700 Series Computer is unable to establish communication
with the radio module installed within.
Chapter 4 — Network Support
115