Intermec 700 Series User Manual page 230

Chapter 6 — Scanner Support
Parameter Default
Decoding Not Active
Check Digit Not Transmitted
Bar Code Length Any Bar Code Length
typedef enum tagPlesseyDecoding
{
ITC_PLESSEY_NOTACTIVE = 0,
ITC_PLESSEY_ACTIVE = 1,
ITC_PLESSEY_NO_CHANGE = 255
} ITC_PLESSEY_DECODING;
typedef enum tagPlesseyCheckDigit
{
ITC_PLESSEY_CHECK_NOTXMIT = 0,
ITC_PLESSEY_CHECK_XMIT = 1,
ITC_PLESSEY_CHECK_NO_CHANGE = 255
} ITC_PLESSEY_CHECK_DIGIT;
#define ITC_BC_LENGTH_NO_CHANGE 255. This definition can be used when the bar
code length does not require any change.
208
Note: The following default settings and enumerations apply to both the
IS9CConfig::GetPlessey and IS9CConfig::SetPlessey functions.
Plessey Default Settings
Plessey Enumerations
// Default
// Default
Valid Range
ITC_PLESSEY_DECODING
ITC_PLESSEY_CHECK_DIGIT
0x00–0xFE ITC_BC_LENGTH_NO_CHANGE
700 Series Color Mobile Computer User's Manual