Code - Intermec 700 Series User Manual

Symbologies
700 Series Color Mobile Computer User's Manual
You can change bar code symbology parameter settings in your 700 Series
Computer via the Data Collection control panel applet. The following
parameters are for bar code symbologies. Additional information about the
more common bar code symbologies are in Appendix B, "Bar Codes." Note
that these parameters are listed in the order of their appearance within this tab.
Most of these symbologies apply to both the imager and the laser scanner
tools. However, when using an imager, the Macro PDF (page 346), Micro
PDF417 (page 348), Matrix 2 of 5 (page 350), Telepen (page 351), and
Code 11 (page 352) symbologies are not supported. Likewise, when using
a laser scanner, the QR Code (page 353), Data Matrix (page 354), and
MaxiCode (page 355) symbologies are not supported.
The following table shows which bar code symbologies are supported ei-
ther by an imager or by a laser scanner.
Bar Code Symbology

Code 39

Interleaved 2 of 5
Standard 2 of 5
Matrix 2 of 5
Code 128
Code 93
Codabar
MSI
Plessey
UPC
EAN/EAN 128
Code 11
PDF417
Micro PDF417
Telepen
Data Matrix
QR Code
MaxiCode
Appendix A — Configurable Settings
Imager Laser Scanner
X X
X X
X X
X
X X
X X
X X
X
X
X X
X X
X
X X
X
X
X
X
X
335