Intermec 700 Series User Manual page 204

Chapter 6 — Scanner Support
Parameter Default
Decode Not Active
CLSI Library System Not Active
Start/Stop Not Transmitted
Check Digit Not Used
Bar Code Length Minimum Length = 6 0x00–0xFE ITC_BC_LENGTH_NO_CHANGE
182
Note: The following default settings and enumerations apply to both the
IS9CConfig::GetCodabar and IS9CConfig::SetCodabar functions.
Codabar Default Settings
Valid Range
ITC_CODABAR_DECODING
ITC_CODABAR_CLSI
ITC_CODABAR_START_STOP
ITC_CODABAR_CHECK_DIGIT
Codabar Enumerations
typedef enum tagCodabarDecoding
{
ITC_CODABAR_NOTACTIVE = 0,
ITC_CODABAR_ACTIVE = 1,
ITC_CODABAR_NO_CHANGE = 255
} ITC_CODABAR_DECODING;
typedef enum tagCodabarStartStop
{
ITC_CODABAR_SS_NOTXMIT,
ITC_CODABAR_SS_LOWERABCD,
ITC_CODABAR_SS_UPPERABCD,
ITC_CODABAR_SS_LOWERABCDTN,
ITC_CODABAR_SS_DC1TODC4,
ITC_CODABAR_SS_NO_CHANGE = 255
} ITC_CODABAR_START_STOP;
typedef enum tagCodabarClsi
{
ITC_CODABAR_CLSI_NOTACTIVE = 0,
ITC_CODABAR_CLSI_ACTIVE = 1,
ITC_CODABAR_CLSI_NO_CHANGE = 255
} ITC_CODABAR_CLSI;
typedef enum tagCodabarCheckDigit
{
ITC_CODABAR_CHECK_NOTUSED,
ITC_CODABAR_CHECK_XMIT,
ITC_CODABAR_CHECK_NOTXMIT,
ITC_CODABAR_CHECK_NO_CHANGE = 255
} ITC_CODABAR_CHECK_DIGIT;
typedef enum tagBarcodeLengthId
{
ITC_BARCODE_LENGTH = 0,
ITC_BARCODE_FIXED_LENGTH,
ITC_BARCODE_LENGTH_NO_CHANGE = 255
} ITC_BARCODE_LENGTH_ID;
// Default
// Default
// a,b,c,d
// A,B,C,D
// a,b,c,d / t,n,*,e
// DC1,DC2,DC3,DC4
// Default
// Default
700 Series Color Mobile Computer User's Manual