Intermec 700 Series User Manual page 305

700 Series Color Mobile Computer User's Manual
S RNTO
Specifies rename-to file name.
S STOR
Stores a file.
S SYST
Shows the operating system type of server system.
S TYPE (Binary transfers only.)
Specifies the data transfer type with the Type parameter.
S USER
Specifies user name.
S XCUP (Not Normally Used)
Changes the parent directory of the current working directory.
S XCWD (Not Normally Used)
Changes the current directory.
S XMKD (Not Normally Used)
Creates a directory.
S XPWD (Not Normally Used)
Prints the current working directory.
S XRMD (Not Normally Used)
Removes a directory.
S SITE
The following nonstandard or operating system (OS)-specific com-
mands are supported by the SITE request. For Microsoft FTP clients,
you can send site commands by preceding the command with "quote"
such as "quote site status."
S ATTRIB
Gets or sets the attributes of a given file. (SITE ATTRIB)
Usage: QUOTE SITE ATTRIB [+R | -R] [+A | -A ] [+S | -S]
[+H | -H] [[path] filename]
+
–
R
A
S
H
To retrieve the attributes of a file, only specify the file. The server
response will be: 200-AD SHRCEIX filename
If the flag exists in its position shown above, it is set. Also, in addition
to the values defined above, there is also defined:
C Compressed file attribute.
E Encrypted file attribute.
I INROM file attribute.
X XIP file attribute (execute in ROM, not shadowed in RAM).
Chapter 7
Sets an attribute.
Clears an attribute.
Read-only file attribute.
Archive file attribute.
System file attribute.
Hidden file attribute.
— Programming
283