Is9Cconfig::setupcean - Intermec 700 Series User Manual

700 Series Color Mobile Computer User's Manual

IS9CConfig::SetUpcEan

This function updates the UPC/EAN settings with new values.
Syntax
HRESULT IS9CConfig::SetUpcEan( ITC_UPCEAN_DECODING
upceanDecode, ITC_UPCA_SELECT upcASelect, ITC_UPCE_SELECT
upcESelect, ITC_EAN8_SELECT ean8Select, ITC_EAN13_SELECT
ean13Select, ITC_UPCEAN_ADDON_DIGITS upcAddOnDigits,
ITC_UPCEAN_ADDON_TWO upcAddOn2, ITC_UPCEAN_ADDON_FIVE
upcAddOn5, ITC_UPCA_CHECK_DIGIT upcACheck,
ITC_UPCE_CHECK_DIGIT upcECheck, ITC_EAN8_CHECK_DIGIT
ean8Check, ITC_EAN13_CHECK_DIGIT ean13Check,
ITC_UPCA_NUMBER_SYSTEM upcANumSystem,
ITC_UPCE_NUMBER_SYSTEM upcENumSystem, ITC_UPCA_REENCODE
upcAReencode, ITC_UPCE_REENCODE upcEReencode,
ITC_EAN8_REENCODE ean8Reencode );
Parameters
upceanDecode [in] Identifies the decoding for UPC/EAN symbology.
upcASelect [in] Identifies the UPC-A selection state.
upcESelect [in] Identifies the UPC-E selection state.
ean8Select [in] Identifies the EAN-8 selection state.
ean13Select [in] Identifies the EAN-13 selection state.
upcAddOnDigits [in] Identifies the Add-on digits.
upcAddOn2 [in] Identifies the Add-on 2 digits.
upcAddOn5 [in] Identifies the Add-on 5 digits.
upcACheck [in] Identifies the UPC-A check digit.
upcECheck [in] Identifies the UPC-E check digit.
ean8Check [in] Identifies the EAN-8 check digit.
ean13Check [in] Identifies the EAN-13 check digit.
upcANumSystem [in] Identifies the UPC-A number system.
upcENumSystem [in] Identifies the UPC-E number system.
upcAReencode [in] Identifies the UPC-A reencoding.
upcEReencode [in] Identifies the UPC-E reencoding.
ean8Reencode [in] Identifies the EAN-8 reencoding.
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Chapter 6 — Scanner Support
217