Beeper Frequency - Intermec 700 Series User Manual

APPENDIX A

Beeper Frequency

Sets the frequency for the good read beep. Note that this is not available when
you use an imager with your 700 Series Computer.
Action:
SNMP OID:
Options:
Tap the Beeper frequency parameter, then enter a frequency value to
change this parameter setting.
1.3.6.1.4.1.1963.15.3.1.4.1.7.1
1000–4095 (default is 2090)
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-33