Codabar - Intermec 700 Series User Manual

Appendix A — Configurable Settings
338

Codabar

Codabar is a self-checking, discrete symbology.
Action
Tap (+) to expand the Codabar parameter, select a setting to be changed,
then select an option from the drop-down list to change this setting.
SNMP OID
1.3.6.1.4.1.1963.15.3.3.1.1.5.1
Options
Decoding
Start/Stop
CLSI library system
(Not supported when us-
ing an imager)
Check digit
Bar code length
Minimum length
Fixed length 1
Fixed length 2
Fixed length 3
Note: If Bar code length = "1" then Minimum length is entered. If Bar
code length = "2" then Fixed length 1, Fixed length 2, or Fixed length 3
is entered.
0 Not active (default)
1 Active
0 Not transmitted (default)
1 abcd transmitted
2 ABCD transmitted
3 abcd/tn*e transmitted
4 DC1–DC4 transmitted
0 Not active (default)
1 Active
0 Not used (default)
1 Transmitted
2 Not transmitted
0 Any length
1 Minimum length (default)
2 Fixed lengths
003–254 Minimum length 3–254 (6)
000–254 Fixed bar code length 0–254 (0)
000–254 Fixed bar code length 0–254 (0)
000–254 Fixed bar code length 0–254 (0)
700 Series Color Mobile Computer User's Manual