Intermec 700 Series User Manual page 436

Appendix A — Configurable Settings
Set Time and Date
414
This command sets the date and time on the 700 Series Computer. The
default date and time is June 1, 1999 at 12:00 AM.
From the network, send the following:
/+ yyyymmddhhmmss
where acceptable values for the date are:
yyyy
0000–9999
mm
01–12
dd
01–31
hh
00–23
mm
00–59
ss
00–59
You can also set the time and date by using Configuration Management in
Unit Manager, or by using the Clock control panel applet in the Settings
menu. To access this control panel applet, tap Start → Settings → the
System tab → the Clock icon to access its control panel applet.
Year
Month of the year
Day of the month
Hour
Minutes
Seconds
700 Series Color Mobile Computer User's Manual