Intermec 700 Series User Manual page 114

Chapter 2 — Pocket PC 2002
92
3 Insert the Ethernet card into your 700 Series Computer. For instruc-
tions on inserting and using the Ethernet card, see the owner's manual.
S If using an on-board Ethernet, place your 700 Series Computer in a
dock, tap Start → Today, then look in the System Tray for the
Ethernet icon (shown left). If not there, then tap the antenna icon for
the NDISTRAY pop-up menu and select Built-in Ethernet from the
menu.
4 The first time you insert the card, Network Settings will appear auto-
matically so that you can configure the Ethernet card. Most networks
use DHCP, so you should not have to change these settings unless your
network administrator instructs you to do so. Tap ok to exit the Net-
work Settings.
If it does not appear or to change settings later, tap Start → Settings →
the Connections tab → the Network Adapters icon, tap the adapter
you want to change, and then tap Properties.
S If using an on-board Ethernet, then select Start → Settings → the
Connections tab → the Network Adapters icon. Select "NE2000
Compatible Ethernet Driver" from the list of adapters installed, then
tap Properties to configure the Ethernet driver.
5 Connect the Ethernet card or dock to the network by using a network
cable. For information, see your owner's manual.
700 Series Color Mobile Computer User's Manual