802.11B Communications; Network Selection Apis; 802.11B Radio Core Module - Intermec 700 Series User Manual

Chapter 4 — Network Support

802.11b Communications

110
When "Wireless 802.11" is selected via the NDISTRAY pop-up menu,
then the antenna shown to the left will appear in the System Tray.
To configure 802.11b communications on the 700 Series Computer, tap
Start → Settings → the System tab → the Wireless Network icon to
access the Profile Wizard for the 802.11b radio module. Go to Appendix
A, "Configurable Settings," for configuration information.

Network Selection APIs

The Network Selection APIs change the network adapter configuration
programmatically. Both drivers support the same IOCTL function num-
bers for loading and unloading the drivers. Go to Chapter 7, "Program-
ming," to see the APIs.

802.11b Radio CORE Module

Note: See page 106 for information on loading this module in CORE.
The 802.11b radio CORE module displays helpful information about the
802.11b radio option built into your 700 Series Computer.
Note that you can configure the 802.11b radio module from this CORE
application. Select Configure → Configure 802.11 CF from the bottom
menu bar to access the Profile Wizard application. See Appendix A, "Con-
figurable Settings," for information about this application via the Wireless
Network control panel applet.
Select Modules → Intermec 802.11 CF Help for more information on
the contents of this CORE module.
700 Series Color Mobile Computer User's Manual