Is9Cconfig::geti2Of5 - Intermec 700 Series User Manual

Chapter 6 — Scanner Support
192

IS9CConfig::GetI2of5

This function retrieves the current settings of Interleaved 2 of 5.
Syntax
HRESULT IS9CConfig::GetI2of5(
ITC_INTERLEAVED2OF5_DECODING* peDecode,
ITC_INTERLEAVED2OF5_CHECK_DIGIT* peCheck,
ITC_BARCODE_LENGTH_ID* peLengthId, BYTE rbgLengthBuff[],
DWORD* pdwNumBytes );
Parameters
peDecode [out]
peCheck [out]
peLengthId [out]
rgbLengthBuff [out,size_is(3)]
pdwNumBytes [out]
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
None.
Pointer to the
ITC_INTERLEAVED2OF5_DECODING
location to receive the decoding for Interleaved
2 of 5 symbology.
Pointer to the
ITC_INTERLEAVED2OF5_CHECK_DIGIT
location to receive the check digit.
Pointer to the ITC_BARCODE_LENGTH_ID
location to receive an indicator of either
ITC_BARCODE_LENGTH or
ITC_BARCODE_FIXED_LENGTH.
An array of bytes to receives 1 byte of data for
ITC_BARCODE_LENGTH or 3 bytes of data
for ITC_BARCODE_FIXED_LENGTH.
Pointer to the DWORD location to receive a
number indicating number of bytes in
rbgLengthBuff[]: 1 byte for
ITC_BARCODE_LENGTH or 3 bytes for
ITC_BARCODE_FIXED_LENGTH.
700 Series Color Mobile Computer User's Manual