Intermec 700 Series User Manual page 264

Chapter 6 — Scanner Support
Symbology (continued)
PDF417/
Micro PDF417
Plessey
Standard 2 of 5
(2-bar start/stop)
Standard 2 of 5
(3-bar start/stop)
Telepen
UPC/EAN
IMPORTANT: The "symbology_id" character letter must be uppercase for the above definitions.
242
ID Character Modifier Characters
L 0 Reader set to conform with protocol defined in 1994 PDF417
specifications.
1 Reader set to follow protocol of ENV 12925 for Extended
Channel Interpretation (all data characters 92 doubled).
2 Reader set to follow protocol of ENV 12925 for Basic Channel
Interpretation (data characters 92 are not doubled).
3 Code 128 emulation: implied FNC1 in first position.
4 Code 128 emulation: implied FNC1 after initial letter or pair of
digits.
5 Code 128 emulation: no implied FNC1.
P 0 No options specified. Always transmit 0.
R 0 No check character validation.
1 Modulo 7 check character validated and transmitted.
3 Modulo 7 check character validated but not transmitted.
S 0 No options specified. Always transmit 0.
B 0 Full ASCII mode
1 Double density numeric only mode
2 Double density numeric followed by full ASCII
4 Full ASCII followed by double density numeric
E Consider UPC/EAN symbols with supplements as two separate sym-
bols. The first symbol is the main data packet, and the second symbol is
the 2 or 5 digit supplement. Transmit these two symbols separately,
each with its own symbology identifier. Provision is made for the option
of transmitting both symbols as a single data packet.
0 Standard data packet in full EAN format (13 digits for EAN-13,
UPC-A, and UPC-E; does not include add-on data).
1 Two digit add-on data only.
2 Five digit add-on data only.
3 Combined data packet comprising 13 digits from EAN-13,
UPC-A, or UPC-E symbol and 2 or 5 digits from add-on symbol.
4 EAN-8 data packet
700 Series Color Mobile Computer User's Manual