Using The Ftp Server; Using A Storage Card; Copying To A Compactflash Card - Intermec 700 Series User Manual

Chapter 3 — Installing Applications

Using the FTP Server

Using a Storage Card

100
4 From your desktop, select Start → Windows Explorer, then browse the
"C:\Intermec\700C Mgmt Tools\CabFiles" path for any CAB files
needed for your 700 Series Computer. Select the appropriate file, right-
click the file for a pop-up menu, then select Copy.
5 Within the Mobile Device directory, go to the directory where you
want the files located on the 700 Series Computer, do a right-click for a
pop-up menu, then select Paste.
6 When all of the files are pasted, perform a warm-boot on the 700 Series
Computer. When the computer reboots, wait for the LED on the top
left of your keypad to stop blinking. Tap Start → Programs → File Ex-
plorer to locate the newly copied executable files, then tap these files to
activate their utilities.
The 700 Series Computer has a built-in FTP Server that connects to a net-
work via Ethernet or 802.11b. This allows connections to the 700 Series
Computer for performing file transfers or computer management func-
tions. Another benefit is that FTP scripts can be created to automate the
process of copying files to the 700 Series Computer. This option is good
for when a large number of 700 Series Computers need to be updated. See
Chapter 7, "Programming," for more information.
Use the following steps to install an application using a storage card.

Copying to a CompactFlash Card

Follow the steps below to install your application on the device using a
CompactFlash storage card:
1 Suspend the 700 Color Computer and remove its CompactFlash drive,
which holds a SanDisk CompactFlash storage card.
2 Using a CompactFlash Adapter card, place the CompactFlash drive in
your desktop PC card drive.
3 Create a subdirectory on the PCMCIA CompactFlash drive in which to
store your application.
4 Use the CEImager application to add the autorun system to the storage
card. See the Software Tools User's Manual to learn about CEImager.
5 Copy your application, data files, and all required DLLs and drivers to
the subdirectory created on the CompactFlash drive.
6 Add your application to the AUTOUSER.DAT file on the
"\Storage Card\2577" directory that contains the following statement,
where your directory is the directory on the CompactFlash storage card
where the application was installed, and yourapp.exe is the name of your
application. Finish the "RUN=" statement with a carriage return line-
feed combination. There may be multiple run statements in the file.
RUN=\<your directory>\<yourapp.exe>
700 Series Color Mobile Computer User's Manual