Intermec 700 Series User Manual page 414

Appendix A — Configurable Settings
392
S PDWPM0C:
This is the installer for the Wireless Printing Demo application. To run
this demonstration, tap Start → Programs → the Wireless Printing
Demo icon. Press Help in the demo application for more information.
S S9C Upgrade:
Installs the files needed to upgrade the S9C scanner firmware. See the
Recovery CD Help for more information about upgrading the firmware.
S SDK:
Installs the Intermec Software Developer's Kit (SDK). See the SDK
User's Manual for more information.
S WinCfg:
Configures the NRINET.INI file, launches the NRINet client, and
loads and unloads the LAN and WLAN device drivers.
S Wireless Printing Sample:
Installs a sample application that developers can use for reference when
they are developing their own Wireless Printing applications. The
source code for this application is included as part of the Wireless Print-
ing SDK on the 700 Color Software Tools CD. See the SDK User's
Manual for more information.
S ActiveX Control Tools:
This lists some of the CAB files that may be available with which to
install ActiveX Control Tools. See the SDK Online Help for more infor-
mation.
S AXCommunication:
Communication controls that transmit or receive messages from in-
put connections.
S AXFileTransfer:
File transfer controls that transmit and receive files using the Trivial
File Transfer Protocol (TFTP).
S AXReaderCommand:
Reader command functions that modify and retrieve configuration
information from your 700 Series Computer.
S AXVWedge:
The virtual wedge control that retrieves scanned ADC data and sends
it to the keyboard driver to interpret data as keyboard input.
700 Series Color Mobile Computer User's Manual