Is9Cconfig2::Getcustomsymids - Intermec 700 Series User Manual

700 Series Color Mobile Computer User's Manual

IS9CConfig2::GetCustomSymIds

This function retrieves all the custom symbology identifiers defined for the
currently supported symbologies. This is not supported when using an imag-
er on the 700 Series Computer.
Syntax
HRESULT GetCustomSymIds( ITC_CUST_SYM_ID_PAIR*
pStructSymIdPair,DWORD dwMaxNumElement, DWORD*
pdwNumElement );
Parameters
pStructSymIdPair
dwMaxNumElement
pdwNumElement
Return Values
HRESULT that indicates success or failure.
Remarks
None.
See Also
S Custom Identifier Assignments (page 227)
S Custom Identifier Example (page 228)
S Custom Identifier Default Settings (page 228)
Chapter
[out] Pointer to ITC_CUST_SYM_ID_PAIR
location to receive the current defined
symbology identifiers for the supported
symbologies. The caller must preallocate
this buffer with dwMaxNumElement
elements.
[in] Maximum number of elements allocated
for the pStructSymIdPair buffer which
should always be equal to the last defined
enumeration constant + 1 of the
enumeration ITC_CUSTOM_ID. In this
case, it is
ITC_CUSTOMID_LAST_ELEMENT.
[out] Pointer to DWORD location to receive
the actual number of elements returned in
the pStructSymIdPair buffer, which should
be the same as dwMaxNumElement.
6 — Scanner Support
225