Intermec 700 Series User Manual page 216

Chapter 6 — Scanner Support
Parameter
Decoding
Check Digit
Bar Code Length
typedef enum tagInterleaved2of5Decoding
{
ITC_INTERLEAVED2OF5_NOTACTIVE = 0,
ITC_INTERLEAVED2OF5_ACTIVE = 1,
ITC_INTERLEAVED2OF5_NO_CHANGE = 255
} ITC_INTERLEAVED2OF5_DECODING;
typedef enum tagInterleaved2of5CheckDigit
{
ITC_INTERLEAVED2OF5_CHECK_NOTUSED,
ITC_INTERLEAVED2OF5_CHECK_MOD10_XMIT,
ITC_INTERLEAVED2OF5_CHECK_MOD10_NOTXMIT,
ITC_INTERLEAVED2OF5_CHECK_FRENCH_CIP_XMIT,
ITC_INTERLEAVED2OF5_CHECK_FRENCH_CIP_NOTXMIT,
ITC_INTERLEAVED2OF5_CHECK_NO_CHANGE = 255
} ITC_INTERLEAVED2OF5_CHECK_DIGIT;
typedef enum tagBarcodeLengthId
{
ITC_BARCODE_LENGTH = 0,
ITC_BARCODE_FIXED_LENGTH,
ITC_BARCODE_LENGTH_NO_CHANGE = 255
} ITC_BARCODE_LENGTH_ID;
194
Note: The following default settings and enumerations apply to both the
IS9CConfig::GetI2or5 and IS9CConfig::SetI2of5 functions.
Interleaved 2 of 5 Default Settings
Default
Not Active
Not Used
Minimum Length = 6 0x00–0xFE ITC_BC_LENGTH_NO_CHANGE
Interleaved 2 of 5 Enumerations
Valid Range
ITC_INTERLEAVED2OF5_DECODING
ITC_INTERLEAVED2OF5_CHECK_DIGIT
// Default
// Default
700 Series Color Mobile Computer User's Manual