Intermec 700 Series User Manual page 259

typedef enum tagSymbologyIdXmit
{
ITC_ID_XMIT_DISABLE = 0 Symbology identifier will not be transmitted as part of the
ITC_ID_XMIT_CUSTOM = 1
ITC_ID_XMIT_AIM = 2
}ITC_SYMBOLOGY_ID_XMIT;
700 Series Color Mobile Computer User's Manual
Note: The following information applies to both the
IS9CConfig2::GetSymIdXmit and IS9CConfig2::SetSymIdXmit
functions.
Symbology ID Transmission Option
The symbology identifier (or code mark) concept provides a standardized
way for a device receiving data from a bar code reader to differentiate be-
tween the symbologies.
The following symbology ID transmission option specifies whether or not
the symbology ID is transmitted as part of the scanned bar code label to all
the connected data collection applications. Options for transmission are:
do not transmit, transmit the standard AIM identifiers, or transmit the one
byte custom defined identifiers. AIM and custom identifiers cannot be se-
lected to be transmitted at the same time; only the last selected option will
be active.
label. This is the default setting.
Activate custom symbology identifier transmission for all
symbologies. Example of the transmitted label:
[preamble] [Custom ID] <data> [postamble]
Activate AIM symbology identifier transmission for all
symbologies. Example of the transmitted label:
[preamble] [AIM symbology ID] <data> [postamble]
Chapter 6 — Scanner Support
237