Intermec 700 Series User Manual page 140

Chapter 4 — Network Support
118
WAN Monitor — Details
Below are descriptions and meanings for each piece of information pro-
vided via the Details tab, reading from top to bottom. Most of this is simi-
lar to what is shown under the General tab. Note that the information is
listed alphabetically.
S Firmware Rev:
This identifies the firmware version, if available.
S IMEI #:
This is the IMEI (International Mobile station Equipment Identity) se-
rial number of the GSM/GPRS radio module.
S IMSI #:
This shows the IMSI (International Mobile Subscriber Identity) num-
ber assigned to the SIM card installed in this 700 Series Computer.
S Manufacturer:
This lists the name of the manufacturer that developed this radio mod-
ule, such as "Siemens."
S Model:
This identifies the product name for this radio module, such as
"MC45."
S Operator:
This lists the name of the service providing the network support.
S RSSI:
This displays the RSSI frequency or lists "Unavailable" if there is no sig-
nal or the signal cannot be retrieved from the radio module.
S Serial Status:
This indicates whether serial communications passed ("PASS") or failed
("FAIL") in its last transaction. A status of "FAIL" typically indicates
that the 700 Series Computer is unable to establish communication
with the radio module installed within.
700 Series Color Mobile Computer User's Manual