Ftp Server - Intermec 700 Series User Manual

FTP Server

700 Series Color Mobile Computer User's Manual
FTP support is provided through the FTP Server application
FTPDCE.EXE (MS Windows CE Versions) which is provided as part the
base system.
FTPDCE is the Internet File Transfer Protocol (FTP) server process. The
server can be invoked from an application or command line. Besides ser-
vicing FTP client requests the FTP Server also send a "network announce-
ment" to notify prospective clients of server availability.
Note: You should consult the RFC959 specification for proper use of
some of these commands at the following URL:
S http://www.ietf.org/rfc/rfc959.txt for the text version, or
S http://www.w3.org/Protocols/rfc959/ for an html version
Do the following to send commands:
1 Start an FTP client and connect to the device FTP server.
2 Log in with "intermec" as the user name and "cr52401" for the pass-
word.
3 From the FTP client, send the command.
4 Enter the new user name (any user name) when prompted.
5 Wait for a response.
Synopsis
ftpdce [ options ]
Options
S –Aaddr
Sets the single target address to which to send the network announce-
ment. Default is broadcast.
S –Bbyte
Sets the FTP data block size. Smaller sizes may be useful over slower
links. Default is 65536.
S –Cname
Sets the device name. Used by Intermec management software.
S –Fvalue
Disables the default Intermec account. A value of "0" disables the ac-
count. Default is "1".
Note: Disabling the default account without providing a working access
control list on the server will result in a device that will not accept any
FTP connections.
S –Hsec
Sets the interval between network announcements in seconds.A value of
"0" turns the network announcement off. Default is 30 seconds.
Chapter 7 — Programming
277