At Command Interface - Intermec 700 Series User Manual

700 Series Color Mobile Computer User's Manual

AT Command Interface

This interface specification is based on the following recommendation:
S ETSI GSM 07.05:
European Digital Cellular Telecommunication System (phase 2)
Use of DTE-DCE interface for Short message and cell broadcast service.
S ETSI GSM 07.07:
European Digital Cellular Telecommunication System (phase 2)
AT command set for GSM Mobile Equipment.
S ITU-T Recommendation V.25 ter
Serial asynchronous automatic dialing and control.
Note: You will need the Adobe Acrobat Reader application to view a PDF
document. Go to http://www.adobe.com/prodindex/acrobat/readstep.html
to install or download the latest Adobe Acrobat Reader according to
Adobe's instructions.
Command Set for Sierra Wireless SB555
Use the AT command interface from Sierra Wireless to program the
CDMA/1xRTT SB555 radio module. Documentation for this interface is
available via the following URL. Click the "General AT command refer-
ence" link for a PDF document, which is 680 KB in size. Note that this
URL is subject to change.
http://www.sierrawireless.com/ProductsOrdering/embedded_docs.html
Command Set for Siemens MC45
Use the MC45 AT command interface from Siemens AG to program the
GPRS/GSM MC45 radio module. The "MC45 Siemens Cellular Engine
AT Command Set" is available either from Intermec Technologies or from
Siemens AG. Contact either your Intermec representative or the Siemens
AG support personnel at the following URL for more information. Note
that this URL is subject to change.
http://www.siemens-mobile.com/btob/CDA/presentation/
ap_btob_cda_presentation_frontdoor/0,2950,12,FF.html
Chapter 4 — Network Support
121