Intermec 700 Series User Manual page 381
Color mobile computer
Hide thumbs
Also See for 700 Series:
- User manual (418 pages) ,
- Quick start manual (36 pages) ,
- Instructions manual (6 pages)
Table of Contents
Advertisement
Action: Tap (+) to expand the Symbology ID parameter, select the Plessey user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.13.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the Standard 2 of
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.23.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the UPC A user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.6.1
Options: x
Action: Tap (+) to expand the Symbology ID parameter, select the UPC E user
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.7.1
Options: x
700 Series Color Mobile Computer User's Manual
Plessey User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Plessey bar code data. Note that this is not
available when you use an imager with your 700 Series Computer.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is D.
Standard 2 of 5 User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify Standard 2 of 5 bar code data. Note that this is
not available when you use an imager with your 700 Series Computer.
5 user ID parameter, then enter a user ID value to change this parameter
setting.
where x is a single ASCII character. Default is D.
UPC A User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify UPC-A (Universal Product Code) bar code
data. Note that this is not available when you use an imager with your 700
Series Computer.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is A.
UPC E User ID
If "1" was selected in the Symbology ID parameter, you can set your own
ASCII character to identify UPC-E bar code data. Note that this is not
available when you use an imager with your 700 Series Computer.
ID parameter, then enter a user ID value to change this parameter setting.
where x is a single ASCII character. Default is E.
Appendix
A
—
Configurable Settings
359
Advertisement
Table of Contents
