Configuring The Ck60 Computer For Your Network; Configuring Serial Communications; Configuring 802.11B/G Radio Communications - Intermec CK60 User Manual

Configuring the CK60 Computer for Your Network

Configuring Serial Communications

Configuring 802.11b/g Radio Communications

CK60 Series Handheld Computer User's Manual
The CK60 Computer is a versatile handheld computer that you can add to
your wired or wireless data collection network. You can connect your
CK60 Computer to your network using:
• Serial communications
• 802.11b/g radio communications
• Ethernet communications
• Bluetootht radio communications
The CK60 Computer has a serial port to transfer data to and receive data
from another device via RS-232 communications. You can also insert the
CK60 Computer into a communications dock to transmit data to and
receive data from a host computer or PC using RS-232 communications.
The serial cable and the communications dock are sold separately. For more
information on accessories, see page 17.
To use serial communications with your CK60 Computer, connect the
CK60 Computer to the serial port of another device, by:
• connecting the CK60 Serial Port to the serial port of the other device
using the 26-pin to DB9-pin serial cable adapter and a female-to-female
null modem RS-232 cable;
• connecting the CK60 Dock to the serial port of the other device using a
DB9-pin to DB9-pin serial adapter cable, then insert the CK60 Com-
puter into the dock; or
• connecting a USB cable between the USB connector in the back of the
CK60 Dock and your desktop computer.
Make sure all components with antennas are at least 30 cm (1 ft) aport
when power is applied. Failure to comply could result in equipment
damage.
Attention: Assurez-vous que la distance entre tous les éléments avec
antennes soit d'au moins 30 centimètres (un pied) avant de faire la con-
nexion avec l'alimentation électrique, faute de quoi vous risquez
d'endommager votre installation.
The wireless CK60 Computer has an internal 802.11b/g radio to transfer
data using wireless communications. This section of the manual assumes
that you have already set up your wireless communications network includ-
ing your access points. If you are using a UDP Plus network, you also need
to have your Intermec Application Server communicating with a host com-
puter.
Chapter 3 — Configuring the CK60 Computer
53