Using the Menu System
Table 1.11 Tray Menu Functions (continued)
Menu Item and Function
Tray Sequence
Set the sequence of trays used by
the printer when tray switching is
required. The available values are:
MBF-1
1-MBF
MBF-2
1-2
MBF-3
1-2-3
MBF-1-2
2-1
MBF-1-2-3
2-3
MBF-2-1
3-1
MBF-2-3
3-1-2
MBF-3-1
Off
MBF-3-1-2
Values in italics are available only with
optional tray(s) installed.
The first tray of a sequence is
used until it runs out of paper, at
which time the next tray in the
sequence is used (if it has the
correct paper size and type).
See the section "Configuring
Automatic Tray Switching"
(page 1-112) for rules and
examples of usage.
1-26
System Administrator Guide
Keystrokes
1. Press Menu Up or Menu Down
until you see:
2. Press Item Up or Item Down until
you see:
3. Press Value Up or Value Down until
you see:
4. Press Enter. You will see:
5. Press On Line. You will see:
Display Reads
Menu s
Tray Me nu
Tray Me nu
Tray Se que nce
Tray Se que nce
New Value
Tray Me nu
Tray Se que nce
Read y
Table 1.11 Page 3 of 10
=