Cannot Print Over Appletalk Or Bonjour Networks - Canon imagePROGRAF iPF6400 User Manual

Large format printer
Hide thumbs Also See for imagePROGRAF iPF6400:
Table of Contents

Advertisement

iPF6400
Cause
The NetWare server and services
are not configured correctly.
The printer was turned off and on
when not disconnected from the
server.

Cannot print over AppleTalk or Bonjour networks

Cannot print over AppleTalk or Bonjour networks
Cause
The AppleTalk protocol is not ena-
bled on the printer.
The computer you are trying to print
from is not configured correctly.
The computer and printer are not on
the same network.
User's Guide
2.
Make sure there is enough free disk space on the NetWare file server. Insufficient disk space may
prevent you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the print
queue is available.
4.
If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer's
network protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
Leave the printer off for at least 30 seconds, and then restore power.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.")
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks (Mac OS X).")
(See "Configuring the Destination for Bonjour Network (Mac OS X).")
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router. Make
sure the computer and printer are on the same network. For information about network settings, ask
your network administrator.
Cannot print over AppleTalk or Bonjour networks
Corrective Action
Corrective Action
→P.698
→P.697
→P.695
903

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents