This Paper Cannot Be Used; Roll Printing Is Selected; Roll Printing Is Selected, But Manual Paper Is Loaded; The Roll Is Empty - Canon imagePROGRAF iPF6400 User Manual

iPF6400
The printer has received a print job longer than the amount of roll paper left when
ManageRemainRoll in the Control Panel menu is On.

This paper cannot be used.

This paper cannot be used.
Cause
Paper that is too large for the printer has been loaded.
Paper that is too small for the printer has been loaded.
Paper has been loaded that is too small to print the test
pattern for printhead adjustment or nozzle checking.

Roll printing is selected.

Roll printing is selected.
Cause
You have attempted to print on a roll, but no
roll is loaded.

Roll printing is selected, but manual paper is loaded.

Roll printing is selected, but manual paper is loaded.
Cause
A print job for rolls was received when a sheet is loaded.

The roll is empty.

The roll is empty.
Cause
The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Press the OK button and remove the roll.
2.
Load the new roll.
3.
If no barcode was printed on the roll, specify the type of paper.
User's Guide
Cause
Press ▲ or ▼ to select Load Roll Paper, and then press the OK button. Load the roll, and
then print.
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
Follow these steps to load and print on a roll.
1.
2.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
(See "Removing the Roll from the Printer.")
(See "Removing Rolls From the Roll Holder.")
(See "Loading Rolls on the Roll Holder.")
(See "Loading Rolls in the Printer.")
(See "Changing the Type of Paper.")
Press ▲ or ▼ and select Stop Printing or press the
Stop button to stop printing.
Corrective Action
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")
→P.524
Press the OK button and load paper of the correct size.
(See "Paper Sizes.")
→P.524
Press the OK button and load unused paper A4/Letter (vertical) or larger. More
than one sheet may be required depending on the adjustment.
Corrective Action
→P.531
→P.534
Corrective Action
Press ▲ or ▼ to select Eject Paper, press the OK button, and remove the sheet.
(See "Removing Sheets.")
→P.560
Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Corrective Action
→P.538
→P.540
→P.531
→P.534
→P.536
This paper cannot be used.
Corrective Action
→P.534
917