Loading Sheets in the Feed Slot
Load one sheet, printing-side up, in the Top Paper Feed
Insert the paper until it touches the far end of the tray light-
Move the Width Guide (a) to match the size of paper loa-
Set the Width Guide against the edge of the paper to pre-
vent the paper from becoming crooked or wrinkled.
Press the OK button.
If a print job was received
After the paper is advanced, the printer starts printing the print job.
If no print job was received
The printer now starts feeding the paper.
If you load a sheet larger than A2, the sheet may fall behind the printer under its own weight. Put your hand under
the sheet to support it and prevent it from falling.
If it is difficult to load rolls from the front of the printer, load them from the back of the printer.