Cleaning Inside the Top Cover
If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend cleaning the Platen after
borderless printing or printing on small paper.
If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend cleaning the Ejection
Guide even if it does not appear dirty, because it may actually be covered with paper dust.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect the Settings/Adj. tab (
Press the OK button.
The Set./Adj. Menu is displayed.
Press ▲ or ▼ to select Maintenance, and then press the OK button.
Press ▲ or ▼ to select Clean Platen, and then press the OK button.
A message on the Display Screen requests you to open the Top Cover.
Open the Top Cover.
If the Tab Selection screen is not displayed, press the Menu button.