Completing the scanning settings on the Color imageRUNNER.
Configure the Color imageRUNNER to send scanned originals to the hot folder. It is easy to send scanned originals to
the hot folder if you assign the scanning settings and destination to a Favorites button on the Color imageRUNNER.
For instructions on assigning scanning settings and destinations to a Favorites button, refer to the setting manual, dis-
played by clicking Color imageRUNNER Enlargement Copy Setup Manual button of Color imageRUNNER Enlarge-
ment Copy utility, or refer to the Color imageRUNNER manual.
Scanning the original and print an enlargement
Follow the steps below to scan an original on the Color imageRUNNER for enlarged printing on the printer. For detailed
instructions, refer to the Color imageRUNNER manual.
Load the original on the platen glass or document feeder of the Color imageRUNNER.
Press Send to display the screen for transmission.
Press Favorites, and then press the Favorites button assigned to the hot folder.
Press Start on the control panel. If you scan originals on the platen glass, after scanning all originals, press
Done on the touch-panel display.
Scanned originals are sent to the hot folder and automatically enlarged and printed following the conditions you
specified for the folder.
Printing Enlargements of Scanned Originals from a Color imageRUNNER (Windows)