Show Job Log
Adj. Fine Feed ( *2 )( *3 )
Info ( *2 )
Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead. (See
"Automatic Adjustment to Straighten Lines and Colors.")
In Frequency, specify the timing for automatic checks of noz-
zle clogging. Choose Standard to have the printer adjust the
timing for checks based on the frequency of nozzle use.
Choose 1 page to check once per page.
Select Warning > On to display warnings if the nozzles clog
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Restores settings that you have changed with Media Configu-
ration Tool to the default values.
Selecting Off prevents display of the log in Job Menu > Job
Log. Additionally, the log is not printed if you choose Job
Menu > Print Job Log. Note that because job logs are not col-
lected, the Status Monitor accounting functions will not work
When transferring the printer to another location, choose the
level of transfer and follow the instructions on the screen. (See
"Preparing to Transfer the Printer.")
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
The password that can be entered is a number from 0 to
The restriction states and main items are shown below. For
more specific information on restricted items, see "Menu Struc-
Viewing and configuration by administrators only
Viewing and configuration by administrators, and only
viewing by other users
Date & Time
Choose OK to restore the Admin. Menu password to the de-
Displayed when you have selected Feed Priority > Adj. Prior-
ity > Automatic or Print Quality. Fine-tune the feed amount
Indicates the current paper size, type, and related printer set-
Indicates ink levels and maintenance cartridge capacity.
Indicates information about the printhead.